Kewtech KT42 Digital Loop and PSC Tester with D-Lok

Kewtech KT42 Digital Loop/PSC Tester with D-Lok

Features:

• Non Trip Loop test on passive RCDs
  
• Instant reading
  
• 20, 200 & 2000Ω Loop measurement ranges
  
• PSC measurement up to 20kA
  
• Displays mains voltage before test
  
• Lock-down test button – for hands free testing
  
• Protected against phase to phase connection
  
• Instant correct wiring status check
  
• Complies with BS7671 (Part P)
  
• Does not require batteries 

Digital LOOP - PSC tester with Anti Trip Technology

Withstand Voltage 3000V ac maximum for one minute between electrical circuit and housing case. General Reading Type Uses rolling average Safety Standard Designed to comply with the requirements of BS 4743

Accessories:

Kamp 13 Mains Lead

ACC016E 3 Wire Distribution Board Test Leads

ACCEP5 External Earth Probe

Test Lead Pouch

Carrying Strap

Instruction Manual

Certificate of Conformity

Product Specifications

LOOP Test Ranges
 Loop Impedance Ranges: 0-20 Ohm, 0-200 Ohm, 0-2000 Ohm
 Loop Impedance Accuracy: ±(2% + 2dgt)
 Lowest Resolution 0.01 Ohm

LOOP Testing
 AC Test Current: 25A nominal
 AC Test Period: 20ms
 PSC Ranges: 0-200A, 0-2000A, 0-20kA
 Opperating Voltage: 230V ± 10%, 50Hz
 Insulation Resistance: 50M Ohm at 1000V ac between electrical circuit and housing case.
 Withstand Voltage: 3000V ac maximum for one minute between electrical circuit and housing case.

General
 Safety Standard: Designed to comply with the requirements of BS4743
 Dimensions: 175 x 115 x 86mm
 Weight: 610g

font face=/font/fontmso-spacerun: yes