Kewtech LOOPCHECK106 Full Socket Tester with a Loop Check

KEWTECH LOOPCHECK106 SOCKET TESTER

• Extremely easy to use!
• Checks the quality of the earthing that is essential for safe installations.
• Checks correct socket outlet wiring.

The Kewtech Loopcheck 106 socket tester provides an easy, cost-effective solution to those looking to check correct outlet wiring and the quality of the earthing.

Using the Loopcheck is extremely simple, with little user interaction required.After placing inside a socket the Loopcheck will immediately start getting to work as it performs a wiring check, any detected faults will then immediately be signaled via red & orange LEDs as well as a warble tone. The position of the LEDs within the device corespond to the polarity of the pins, providing an obvious identifier to where a potential issue is located.

Once a wiring check has been performed and the socket polarity has been determined to be appropriate the tester initiates a test, at mains frequency, to check the quality of the earth loop. The condition of the earth loop return path is then displayed via three differently coloured LEDs.